Chevy Deck
Basic Block Machine Work
Keeping with our format of dealing with real-world problems, we called on the services of veteran race engine builder Ed Pink to offer some expert essential information on basic block machine work, tips on how to spend budgeted funds, and what to look for when having machine work done by a shop.
Daydreaming and fantasizing about what could be, if money were no object, offers every racer a chance to relax and drift away from daily problems. But, reality has a way of creeping up like a silhouette against a blank wall. For the weekend racer, reality means getting the biggest bang for your buck each and every time a checkbook is flipped open.
We set our parameters for the story based on three different budgets: First, for the weekend racer with a very small budget, $500 was allocated for basic machine work on the block. The block we chose for Phase One is a used, two-bolt main, standard 350-cid Chevy. In Phase Two, we bumped the allowance to $1,000, aiming at the racer who may have some financial support from sponsorship. And finally, we kicked the ante up to $2,000 in Phase Three for the racer who has sponsorship on a full-time basis and has more funds available.
Headwork and special machining on aluminum or aftermarket blocks is not included. The blocks used in Phase Two and Phase Three is designated as a Chevy Bow Tie, however, what is discussed can be applied to any project block. According to Pink, the work illustrated in this story is based on the criterion of being essential to a quality final product. In other words, the work performed, in Pink's opinion, is all necessary to build a quality engine. All work is based on typical pricing (as of this writing) at a first-class machine shop. Cut-rate, backyard, or brother-in-law garage deals were discarded. "If machine work is not performed by a very high-quality shop, one [that is] in touch with the needs of the racer, using top-of-the-line equipment," Pink says, "then whatever money is spent on block preparation can be considered wasted." He continues, "So, if you walk into a shop, and the owner says, 'Ya just leave it, I'll handle it later,' just say no."
Phase One--We've Got $500
In Phase One, we have a used block and $500--the budget racer has little room for error. The block must be inspected, hot-tanked (cleaned), and Magnafluxed for cracks. Next, Pink recommends pressure-testing the block for leaks by placing the block (filled with air pressure) into a water reservoir. If the block is good--no leaks, no cracks--the next step is to bolt up the main caps (without bearings), measure for diameter size and concentricity, and align. Here comes the kicker! Because we are dealing with a $500 budget, the following scenario may be possible. In the rare occasion that the block in question checks out, align-boring may not be necessary. Remember, we are on a $500 budget. But, if the mains are out-of-round, then align-boring or align-honing will be mandatory. The usual cost for the honing or boring of the mains is $180. Once the mains are align-bored or honed, the centerline of the crankshaft is established.
Next, the block is decked. To deck a block, all four corners of the block are measured to the centerline of the mains (crankshaft) to determine if the block is square (also to set deck height). If the block is off, the head surface is machined until it measures the same, rear to front and side to side (0.001 to maximum tolerance). With the block square, the cylinders can be bored. In our Phase One example, Pink suggested that the block be bored 0.030-inch over. The cylinders are bored or power-honed using a torque plate. To be sure the bore size is correct, Pink suggests that at this time, you ask the machine shop person doing the job about which piston size to use in the engine and piston-to-wall clearances.
With the cylinders bored, we need to stop and do some calculations. We began with $500. The hot tank, pressure testing, and the Magnaflux test cost about $105 to $130. If the mains need to be align-honed (bored), add $180. Decking the block runs about $180. On the high end we have spent about $640; on the low end, $575. If the block did not need to be align-bored (honed), the cost would be $400 to $460. Throw in a few odds and ends (Welsh plug installation, fitting the cam bearing, and so forth), and you have spent the $500 budget plus a few extra bucks--but you have a quality basic block ready for assembly.
Phase Two--A Grand
With a fresh $1,000 budget, we can begin anew. In Phase Two we hot tank, pressure test, and Magnaflux as in our first phase, but this time there is no hesitation about align-boring/honing the mains. Also, the block, when decked, is surfaced on a mill using a special squaring fixture to ensure a perfect 90-degree angle to the centerline of the crankshaft. This fixture bumps the cost of decking/squaring the block from $150 to $190. Also upgraded is the cylinder-boring process. This time, the cylinders are power-honed (with the torque plate), using several different hone-grit surfaces (stones) to achieve near-perfect tolerances (rough cut is #133 stone, finish rough cut is $525 stone, fine cut is #625 stone, and finish cut (super fine) when running moly rings is #820 stone). The cost for this process is $180.
After the block is square--mains honed and aligned--and cylinders bored, Pink suggests opening up the main oil feed or gallery to the center three main bearings ($22). Next, Pink will drill and tap the oil restrictors to the lifters (restricting the oil flow to the lifters) front and rear of the block. What this means is that the holes are drilled and tapped, and then tiny set screws with drilled orifices are installed for a cost of $40. Next, the three front oil galleries have the soft plugs removed and are machined to accept 1/4-inch pipe plugs for $15. To regulate oil flow in the valley chamber, Pink drills, taps, and uses 1/4-inch pipe fittings to block the valley chamber oil drains (-8 fittings) for $15. Next, Pink machines, drills, and taps all core plugs (freeze plugs) for special "button head" screws. For $100, the screws are installed and safety-wired so they cannot blow out. Finally, it runs about $70 to fit the cam and install the cam bearings. If we hit our adding machine again, the price tag for our Phase Two block has reached $950. Add a few miscellaneous items and the budget is consumed.
Phase Three--Two Grand, Total
Now we have $2,000 to spend. Once all the aforementioned steps are completed, we begin the final stage with the installation of aftermarket four-bolt mains and aftermarket studs for $200 (labor only/no parts). If you use a Bow Tie block, then aftermarket four-bolt mains are not necessary. In this "premier" block, Pink machines an oil groove into the main saddles of the block for better oiling to the main bearing; that costs $115. If aftermarket four-bolt mains are used, the cost of align-boring/honing is $220. Notice that this is slightly higher than our tow-bolt mains on the blocks used in Phases One and Two. The reason? The aftermarket mains (steel) include rough or smaller bore sizes and must be machined to fit the cast-iron block--more work, more money.
Also, our Phase Three block receives an additional alignment procedure. In this stage, the cam holes in the block are actually align-bored and the holes fitted with a 0.030-inch-over cam bearing. This $250 step is not the same as simply fitting and installing cam bearings as found in Phase Two. Here, the cam bore and bearings are aligned perfectly, and this puts the cam and crankshaft in the same line. Also, the oil groove behind the cam bearing is enlarged on all five journals of the block (wider and deeper), which costs $160. With the oil capacity increased at the cam journals, the center main bores must be drilled for more oil capacity, so that's $22. At this point, Pink considers using special fixtures in boring the block to ensure that all of the cylinders are parallel to the crankshaft and in perfect line. The extra cost of this upgraded boring process is about $40. Another step is relocating the dowel pins to a correct position in line with the cylinder head, also $40. Lifter bores are up next. They are machined and aligned, sleeves are installed and machined, and oil galleries are drilled, honed, and deburred. Then the lifter bushings are honed to size (labor only/no parts) for $290. If the block must be converted from a wet-sump to a dry-sump oil system, the machining work is about $110. Suddenly, our $2,000 budget is close to being depleted.
Despite many more modifications engine builders make to blocks to help build horsepower and reliability, what we have given is a basic look at block machine work--at what must be done to have a fighting chance of building a strong engine. As a final footnote, Pink suggests that when you have a block machined--following the procedures explained here--talk to the shop and determine whether you can handle certain jobs at home. Labor-intensive jobs such as deburring, clearance grinding, redoing freeze-plug fitting, and grinding burrs from valley surfaces may be handled by the budget-minded racer. Remember, the work done to your block is only as good as the shop performing the task, so ask your fellow racers for recommendations. Be sure the shop you pick does race engine work and understands the needs of a racer.
About the Author
nbnyzj.com is a professional manufacturer and exporter of all kinds of Single and Multi Spring brick machine.We are a member of Building Block Association with excellent and advanced technology.You can buy cheap concrete brick machine and block machine.
1980 chevy with 427 tall deck
 |
 HHR 06 11 Chevy SAA Chrome Rear Deck Trim RD46140 $71.40 Time Remaining: 11d 5h 24m Buy It Now for only: $71.40 Buy It Now |
 1966 CORVAIR ORIG TURBO DECK EMBLEM RESTORED 180 HP WILL FIT 65 ALSO $11.50 (2 Bids) Time Remaining: 1d 20h 57m |
 1958 1959 1960 1961 1962 Corvette Original Female Deck Lid Latch $149.99 Time Remaining: 22h 35m Buy It Now for only: $200.00 Buy It Now |
 97 98 99 Chevy Malibu REAR DECK SPEAKER GRILLE COVER L R GRAY 2000 2001 2002 $19.99 Time Remaining: 29d 15h 3m Buy It Now for only: $19.99 Buy It Now |
 LIGHT ALUMINUM 52 DOUBLE DECK GT BUMPER WING BLACK SPOILER $80.99 Time Remaining: 8h 57m |
 Trunk Gate Deck Lock Chevy Buick Olds Pontiac 1981 1996 $25.69 Time Remaining: 11d 14h 20m Buy It Now for only: $25.69 Buy It Now |
 BLACK ALUMINUM ADJUSTABLE GT DOUBLE DECK F1 STY REAR SPOILER WING $84.99 Time Remaining: 8h 57m |
 BLACK ALUMINUM ADJUSTABLE 52 DOUBLE DECK RACING STYLE TRUNK WING SPOILER MAZDA $83.95 Time Remaining: 11h 46m Buy It Now for only: $92.95 Buy It Now |
 97 98 99 CHEVY MALIBU REAR DECK SPEAKER GRILLE COVER L R TAN 2000 2001 2002 OEM $19.99 Time Remaining: 29d 14h 59m Buy It Now for only: $19.99 Buy It Now |
 52 GT RACING SPORT DOUBLE DECK ADJUSTABLE SPOILER REAR TRUNK WING $86.95 Time Remaining: 12h 6m Buy It Now for only: $95.95 Buy It Now |
 1990 1994 Chevrolet Lumina Deck Lid Light $21.50 Time Remaining: 29d 17h 44m Buy It Now for only: $21.50 Buy It Now |
 52 ADJUSTABLE WINGS ALUMINUM DOUBLE DECK RACING STYLE REAR SPOILER $84.99 Time Remaining: 12h 25m Buy It Now for only: $93.99 Buy It Now |
 SILVER ALUMINUM 52 F1 DOUBLE DECK ADJUSTABLE REAR WING SPOILER $77.99 Time Remaining: 12h 45m |
 49 50 51 52 CHEVY BUISNESS COUPE HARDTOP CONVERTIBLE TRUNK LID DECK LID 1950 $300.00 Time Remaining: 29d 19h 15m Buy It Now for only: $300.00 Buy It Now |
 1938 1940 GM CHEVY DECK TRUNK LID SUPPORT CAM SPRINGS NOS SET OF 12 $9.99 Time Remaining: 17h 8m |
 1964 64 Chevy Impala Rear Deck Lid Trunk Wiring Harness $54.95 Time Remaining: 3d 1h 30m Buy It Now for only: $54.95 Buy It Now |
 BLACK 52 ALUMINUM DOUBLE DECK ADJUSTABLE REAR Trunk Spoiler $84.99 Time Remaining: 15h 25m Buy It Now for only: $93.99 Buy It Now |
 VERY RARE CALDWELLS CAR COOL SWAMP COOLER REAR DECK A C CHEVY OLDS BUICK D102 $999.99 Time Remaining: 29d 13h 47m Buy It Now for only: $999.99 Buy It Now |
 52 GT RACING STYLE DOUBLE DECK ADJUSTABLE SPOILER WING w BRACKET SCREW KIT $86.95 Time Remaining: 12h 11m Buy It Now for only: $95.95 Buy It Now |
 52 BLACK ALUMINUM ADJUSTABLE DOUBLE DECK REAR SPOILER WING LIGHT WEIGHT $82.99 Time Remaining: 18h 27m Buy It Now for only: $91.99 Buy It Now |
 82 92 CAMARO FIREBIRD PLASTIC COATED FACTORY HATCH DECK LID HINGE BEAUTY BOLTS $45.00 Time Remaining: 28d 21h 40m Buy It Now for only: $45.00 Buy It Now |
 52 BLACK ALUMINUM ADJUSTABLE DOUBLE DECK RACING STY REAR SPOILER WING $81.98 Time Remaining: 17h 44m Buy It Now for only: $90.98 Buy It Now |
 Camaro Metal Sign CAM2 1968 69 Header Deck SUPERSIZED 50 WIDE PhotoSTEEL $199.99 Time Remaining: 23d 10h 2m Buy It Now for only: $199.99 Buy It Now |
 ALUMINUM 52 DOUBLE DECK GT WING TRUNK REAR RACING SPOILER ANODIZED BLACK JDM $68.15 Time Remaining: 17h 29m Buy It Now for only: $75.07 Buy It Now |
 C3 Corvette Convertible Deck Lid Bezel and Top Bow Lock $65.00 Time Remaining: 19h 32m |
 84 90 Corvette C4 Rear Gas Lid Door Deck Emblem NEW GM Licensed $49.00 Time Remaining: 5d 16h 55m Buy It Now for only: $49.00 Buy It Now |
 SILVER DOUBLE DUAL DECK LIGHT ALUMINUM 52 GT REAR SPOILER WING $70.99 Time Remaining: 20h 7m |
 82 92 CAMARO FIREBIRD HATCH DECK LID STRUT BOTTOM BOLTS $9.99 Time Remaining: 8d 19h 5m Buy It Now for only: $9.99 Buy It Now |
 52 DOUBLE DECK SLIVER LIGHT ALUMINUM GT RACING REAR SPOILER WING EVO $72.99 Time Remaining: 21h 45m |
 1955 1956 1957 CHEVY CHEVROLET BELAIR 210 150 TRUNK DECK LID HINGE COVER OEM $16.95 Time Remaining: 1d 20h 41m |
 1985 1986 Chevrolet Monte CARLO SS TRUNK DECK LID DECAL $14.99 Time Remaining: 28d 18h 52m Buy It Now for only: $14.99 Buy It Now |
 52 RACING ADJUSTABLE ALUMINUM REAR DOUBLE DECK BLACK SPOILER WING $82.99 Time Remaining: 1d 3h 27m Buy It Now for only: $91.99 Buy It Now |
 2010 2012 Camaro Red RS Rear Decklid Trunk Emblem OEM $21.44 Time Remaining: 7d 9h 19m Buy It Now for only: $21.44 Buy It Now |
 52 SILVER DOUBLE DECK LIGHT ALUMINUM GT WING SPOILER ACCORD $72.99 Time Remaining: 22h 45m |
 10 12 Camaro Coupe Trunk Deck Lid GENUINE GM 92226389 $354.26 Time Remaining: 15d 12h 6m Buy It Now for only: $354.26 Buy It Now |
 Michael Jordan 1998 99 Upper Deck Chevy Blazer Looking Down BGS 9 $1,499.00 Time Remaining: 1d 22h 45m Buy It Now for only: $2,999.00 Buy It Now |
 Big Block CHEVY BLOWER MANIFOLD SHORT DECK $200.00 Time Remaining: 13h 14m Buy It Now for only: $400.00 Buy It Now |
 93 02 Camaro Firebird Tan Package Deck Cargo Cover Z28 SS TA Trans Am $58.95 Time Remaining: 29d 21h 53m Buy It Now for only: $58.95 Buy It Now |
 Vintage Old Automobile Accessory Dash Deck Column Defroster Rubber Blade FAN gm $13.99 (1 Bid) Time Remaining: 1d 15h 59m |
 1950s CADILLAC CHEVY DUELDORADO CHROME DUAL REAR DECK ANTENNA KIT IN BOX $125.00 Time Remaining: 24d 13h 33m Buy It Now for only: $125.00 Buy It Now |
 52 ALUMINUM DOUBLE DECK GT WING TRUNK REAR SPOILER BLACK $80.99 Time Remaining: 1d 10h 7m |
 ADJUSTABLE 52 ALUMINUM REAR DOUBLE DECK BLACK LIGHT WEIGHT SPOILER WING $84.99 Time Remaining: 1d 10h 55m Buy It Now for only: $93.99 Buy It Now |
 Radio Tape Deck 16156555 1988 1994 GM Trucks $59.99 Time Remaining: 23d 5h 31m Buy It Now for only: $59.99 Buy It Now |
 ALUMINUM 52 DOUBLE DUAL DECK GT WING TYPE S RACING BLACK TRUNK REAR SPOILER v5 $68.15 Time Remaining: 1d 11h 7m Buy It Now for only: $75.07 Buy It Now |
 2003 2003 2005 CHEVY CAVALIER DECK TRUNK LID MOUNTED CENTER REAR TAIL LIGHT LAMP $99.99 Time Remaining: 14d 21h 23m Buy It Now for only: $99.99 Buy It Now |
 52 ADJUSTABLE BLACK DOUBLE DECK LIGHT ALUMINUM WINGS SPOILER BLACK $84.99 Time Remaining: 1d 12h 50m Buy It Now for only: $93.99 Buy It Now |
 52 DOUBLE DECK SLIVER LIGHT ALUMINUM GT RACING REAR SPOILER WING HONDA $70.99 (1 Bid) Time Remaining: 1d 10h 27m |
 73 CHEVY 427 TALL DECK TRUCK ENGINE BIG BLOCK 3999294 18k Orig Miles CHEVELLE $550.00 Time Remaining: 6d 8h 58m Buy It Now for only: $550.00 Buy It Now |
 1960s CORVETTE STINGRAY hood deck trim logo $88.88 Time Remaining: 1d 10h 1m Buy It Now for only: $100.00 Buy It Now |
 3D Carbon 2010 11 12 Chevy Cruze Unpainted Rear Deck Lid Wing Spoiler 691824 $150.00 Time Remaining: 7d 16h 48m Buy It Now for only: $150.00 Buy It Now |
 BLACK ALUMINUM ADJUSTABLE GT DOUBLE DECK F1 STY REAR SPOILER WING $85.95 Time Remaining: 1d 17h 6m |
 Pioneer DEH-2200UB CD Receiver with iPod Direct Control and USB Input List Price: Sale Price: $81.08 You save: $53.92 (40%)  Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionPioneer's DEH-2200UB is an affordable replacement for your bare-bones OEM system, giving you playback of WMA/MP3 files from disc or USB devices, optional direct iPod control, selectable green/red key illumination, and then some...  |
 Detroit Tigers Jim Bunning 2008 MLB Chevy Corvette with Hof Trading Card List Price: Sale Price: $5.51 You save: $4.48 (45%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product Description2008 MLB Chevy Corvette with HOF Trading Card - Detroit Tigers - Jim Bunning |
 Original Camaro 1967-1969: The Restorer's Guide 1967-1969 (Original Series) List Price: Sale Price: $25.05 You save: $12.90 (34%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionThis guide is written and designed for enthusiasts attempting to determine which parts, accessories and colours will restore their first-generation Camaro to factory-original condition. A huge selection of colour photography depicts Chevys major performance packages of the period-the SS, RS and Z-28-while carefully detailing engines, interiors and bodies. |
 Deck The Halls Sale Price: $2.99 Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product |
 1959 Chevy Rear Deck Vista Car Wax Photo Print Ad See Reviews For This Product DescriptionAn original vintage magazine ad print from the year published. Print ads make unique gift items that can be framed as artwork. Shipped flat un-framed in plastic sleeve with backing board. |
 Pioneer DEH-1200MP CD Receiver with MP3/WMA Playback and Remote Control List Price: Sale Price: $54.99 You save: $45.01 (45%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionPioneer's DEH-1200MP is a no-frills CD receiver with MP3/WMA disc playback, and makes a clean and simple replacement for OEM stereos. Play back your favorite CDs and CD-R/RW discs, dial in your favorite AM/FM stations, or burn MP3/WMA CDs for hours of music on a single disc... |
 Pioneer AVH-P3200BT In-Dash DVD Multimedia AV Receiver List Price: Sale Price: $324.72 You save: $175.28 (35%) Eligible for free shipping!Availability: Usually ships in 1-2 business days See Reviews For This Product DescriptionGet your media on the road with Pioneer's AVH-P3200BT, an in-dash double-DIN DVD Multimedia AV Receiver featuring built-in Bluetooth and a 5.8-inch widescreen display. With versatile music and video playback, modern features like USB Direct Control and DivX support, a built-in MOSFET 50 W x 4 amplifier, and plenty of expansion options--not to mention the ability to make and receive calls--it's the perfect way to turn your vehicle into a mobile entertainment center... |
 Boss BV9560B 7-Inch Double DIN Motorized Widescreen Touchscreen In-Dash TFT Monitor/DVD/MP3/CD Combo Receiver with Built-in Bluetooth List Price: Sale Price: $202.81 You save: $325.19 (62%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionThe double-DIN BV9560B from Boss Audio Systems is an affordable way to add DVD entertainment to your vehicle. Enjoy playback of DVDs, CDs, SVCDs, and VCDs. Includes both a USB port and SD/MMC card slot for quick enjoyment of digital media (MP3/WMA/MP4) as well, along with an AM/FM radio with 30 presets... |
 Kenwood KDC-MP145 In-Dash CD/MP3/WMA Receiver with Aux Input List Price: Sale Price: $72.00 You save: $27.99 (28%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionKenwood's KDC-MP145 is a quick way to add WMA/MP3 playback to your vehicle, along with a front input for your portable music player. This CD receiver keeps it simple, delivering playback of your digital files from a data disc, AM/FM radio, a preamp output for expansion, and quality Kenwood sound on a budget... |
 Pioneer DEH-4200UB CD Receiver with OEL Display and USB iPod Control List Price: Sale Price: $119.99 You save: $80.01 (40%) Eligible for free shipping!Availability: Usually ships in 24 hours See Reviews For This Product DescriptionPioneer's DEH-4200UB is an ideal way to upgrade your OEM system, offering playback of WMA/MP3/AAC files from disc or USB devices, optional direct iPod control, and plenty more. It also offers big-time opportunity on the upgrade front--easily add Bluetooth and HD/SAT Radio, or use the three pairs of preamp outputs to build a system with external speakers and amplification... |
